PI Motorsports, Inc.
Pantera Parts

1040 North Batavia, Suite G, Orange, California 92867
Telephone: 714-744-1398 - Fax: 714-744-1397
e-mail: sales@pim.net

C Products - Aftermarket and custom items

Join the PI Motorsports, Inc. Platinum Pantera Customer plan for further discounts on parts and services. Click here for more information.




Caps - Sway bar
Sway bar covers
DeTomaso sway bar plaque
Chromed sway bar


  • Carved from billet aluminum are these precision sway bar caps.

  • Pentagraphed Isis logo

  • Brilliant polish

  • Beats having to clean and replace stick-on type Isis logos.



Pantera Platinum Customers Price: $34.95

Non-Member Price: $39.95

Chrome sway bar - Pantera Platinum Customers Price: $145.00 exchange with your old

Non-Member Price:$150.00
DeTomaso cover plate
Pantera Platinum Customers Price: $55.95
Non-member price: $59.95

PI Motorsports Phenolic 
Carburetor Spacer

  • Dyno-proven to deliver over 40 horsepower from 383 cubic inch SBC. Your results may differ but you can expect a surprising gain.

  • More horsepower than a 1" open spacer.

  • Scientifically designed for maximum undisturbed air flow creating a more even fuel distribution.

  • The proven unsurpassed insulating properties of Phenolic.

  • More horsepower per dollar spent than virtually any other modification.

  • You may have to realign or adjust your throttle linkage to compensate for the spacer.

  • Some applications may result in the air cleaner contacting your engine cover. It may be necessary to modify your engine cover, remove it or use a lower profile air cleaner.

120105carbspacer.jpg (209522 bytes)  120105carbspacer1.jpg (231330 bytes)  120105carbspacer2.jpg (219287 bytes)  120105carbspacer3.jpg (165976 bytes)


Extreme Brand

Car Care Products
Polishes and Waxes

  • Concours Car Wax - 16 ounces. $8.99
  • Metal Polish - 3 ounces: $11.95
  • Metal Majic Sealer - $12.99 for Eight ounces

Holley-modified for 
the Pantera

  • The Ultimate Holley Carburetor for Street and Performance Panteras

  • This is a carburetor that offers the best of all worlds for the Pantera. Starting with a Holley 4150 HP carb and then customizing it.

  • Screw in air bleeds

  • Reusable Viton gaskets

  • Notched float and jet extensions to prevent fuel starvation

  • Milled airhorn, choke tower and choke control

  • High flow throttle body with 1.75" bores

  • Dual inlet fuel bowls with brass floats

  • Four corner idle system for improved idle control

  • High flow power valves and viton-tipped needle/.120 seat assembly

Car Covers

Premium embroidered Isis Logo car cover shown.

  • If you are looking to replace your car cover with a high tech item at a reasonable price then please consider the following attributes of our newest cover:
  • Super soft nonabrasive fabric
  • Water resistant yet breathable. This is not to mean this cover is totally waterproof. For outdoor storage, this car cover is not meant for permanent storage.
  • Mirror Pockets
  • Elastic hems for a snug fit
  • Reinforced side grommets for tie-down 
  • Optional lock system.
  • Double stitched seams
  • Not affected by temperature extremes
  • High UV resistance.
  • Will not rot or mildew
  • Drawstring storage bag included.
  • Limited lifetime warranty
  • Specify wide-body or stock body for correct car cover.


Carbon Fiber Components

Please Click Here To View Our Full Line


Carpet for under the hood

InsideHood1.jpg (176096 bytes)  InsideHood2.jpg (131167 bytes)

  • Trim out the underside of your front hood with this 5-piece, rich looking and embroidered set.

  • Made to fit and offers a tuxedo-like appearance for the owner who desires a finished and trimmed look.

  • Embroidered Isis logo and Pantera script.


Carpet - Front trunk mat

trunkmat41505a.jpg (234831 bytes)  trunkmat41505b.jpg (172679 bytes)  trunkmat41505c.jpg (152257 bytes)


  • Front trunk mat offers another level of luxury

  • Quality carpet with bound edges.

  • Embroidered logo and Pantera script


Carpet - Interior Trim Kit

  • Is it time for you to refurbish your interior carpets?

  • Why not upgrade beyond the stock low-rent style carpets and install a set of our German, high-end carpets and trim pieces.

  • Our kit also includes thick padding for that plush look and feeling with added sound insulation.

  • Ready to install with black trim piping on all carpet pieces.


  • Platinum Price: $475.00 for the lock-out arm only

  • Non-Member Price: $500.00 for the lock-out arm only


Pantera Air Cleaner Billet Cover
  • Billet aluminum construction

  • Excellent clarity of grooves and logo

  • Highly defined and precision edges

  • Precision painting for concours appearance.

  • A part that you will be proud to have on your special Pantera.

   6707AC3.jpg (125903 bytes)  6707AC4.jpg (144755 bytes) 


Clutch, pressure plate and throw out bearing system

  • This is the system that we use and recommend for all Panteras, especially where the horsepower has been increased significantly. Used on our 500 + horsepower engines.

  • We personally use this system in both the Hound from Hell tube frame Pantera (9 second quarter mile ET) and Whiplash (Group 5 over 500 horsepower). Works like a charm.

  • Included is the clutch, pressure plate and throw out bearing as shown.



Clutch throw out bearing and retaining hub

  • Billet steel not cast
  • New high performance sealed throw out bearing
  • Adjustable for any clutch
  • Adjustable for any clutch
  • Height adjustable for Borg Warner or diaphragm type clutch
  • Quality machine work


newprodbear716b.jpg (41899 bytes)  newprodtobear716.jpg (37070 bytes)
newprodtobear716a.jpg (36775 bytes)  newprodtobear716cc.jpg (32252 bytes)

Stock unit shown on left


Clutch Master Cylinder


  • DeTomaso clutch master cylinder.
  • Rebuilt with reservoir.
  • DeTomaso factory script


Clutch Lines


  • Top quality lines and fittings
  • Update your system to stainless braided.
  • Correct sizing.

Condensor Fan
Air Conditioner

  • High-density A/C Condensor Fan
  • Improve cooling and reliability.
  • Can also be installed remotely.
  • Easy to install

 Center Bulkhead 

centercover222.jpg (7343 bytes)

  • Fabricated out of Carbon Fiber. Provides easy access to the
    front of your motor. With simple modifications, you no longer
    have to remove seats or roll bar.
  • Saves weight and saves time. 

Cooling Fans
Sucker Style

  • The Pantera is always getting a bad rap on the cooling system. Those of us who know the car are aware that the up-dates available can easily cure that ancient misconception. 
  • And now, we are really pleased to bring to market these new slim line fans. 
  • Our twelve inch model blows at 850 cam, more than double stock and our heavy duty fan, measures 14 inches and flows at 1250 cam. 
  • They are perfect for "lay down" modifications.


3v1113d.jpg (55315 bytes) 3v1113a.jpg (50779 bytes) 3v1113c.jpg (45178 bytes) 3v1113b.jpg (55123 bytes)

  • These heads come bare with high-nickel chrome valve seat inserts, uncut to allow head porters to perform further work and create their own valve seat combinations.

  • Standard 4V manifolding and valve train components allow for economical upgrading from cast iron heads.



  • After long being neglected by cylinder head manufacturers, owners of Ford Cleveland V8's can now enjoy the maximum flow potential, thermal efficiency and light-weight of purpose built heads from Australian cylinder head specialists.

  • These heads feature the best elements of 4V and 2V designs with standard 4V valve sizes, flow aq massive 321 CFM on the intake and 220 CFM on the exhaust, at just .650" valve lift, OUT OF THE BOX! Great attention has been paid to port cross sectional area to achieve these flow figures while still maintaining excellent air velocity for superior torque and throttle response.

  • Incredibly light compared to regular cast iron, weighing just 24 pounds each, a weight savings of 28.5 pounds over the factory 2V iron head.

  • Aluminum cylinder heads:

  • Pantera Platinum Customers Price:  $1,995.00 per pair.

  • Non-member price:

  • $2,095.00

  • Fully built out heads available. 
    Please call to discuss your application.

Cylinder Heads
2V and 4V

newheads599.jpg (20176 bytes)

2vheads322.jpg (9978 bytes)

  • 4V Closed Chamber bare cylinder heads. 

  • In like new condition. 

  • Very hard to find. 

  • Limited availability

  • Aussie 2V heads

  • Generally unobtainable

  • Heads are in bare condition or can be built out with our own specification 3 angle valve job

  • Heads are cleaned and magnafluxed already

Cylinder Heads

  • If you really want something special, we have completely built Aussie heads
    that are ready to bolt on and feature the latest technology at value prices,
    especially for the Pantera. 
  • Aussie, full house 2V heads. 
    Stainless steel valves
    Single hydraulic springs
    Steel 10 degree retainers and locks
    Special exhaust seals
    Labor includes disassemble, bronze guides, porting
    3 angle valve job, special machining, milling, surfacing and assembly

Ordering Instructions

There are three ways to order:

  • Pick up the telephone and call us at (714) 744-1398. We are open M-F from 9-5 Pacific Standard Time

  • Fax us your order to (714) 744-1397 and be sure to include your Visa or MasterCard number and expiration date. Include all the shipping particulars. We use UPS

  • Mail us your order and include a check or money order. No cash please!

  • 25% Re-Stocking fee on returned merchandise. Please make all of your selections and purchases carefully. Thank you.




PI Motorsports, Inc.
1040 Batavia, Suite G
 Orange, California 92867
 telephone: (714) 744-1398 - fax: (714) 744-1397
 e-mail: sales@pim.net

 Return to the home page

serving the DeTomaso enthusiast since 1996



Return to the Parts Table of Contents
New products page

Other Parts Pages
[A]  [B]  [C]  [D]  [E]  [F]  [G]  [H]  [I]  [J]  [K]  [L]  [M]  [N]  [O]  [P] [Q]  [R]  [S]  [T]  [U]  [V]  [W]  [X]  [Y]  [Z]

Contact us         Return to the home page

August 19, 2010